Added native 64-bit mode for both ia64 (Intel Itanium) and x64 (Intel64 and AMD64).
There are 2 new images SIV64I.exe for Itanium and
SIV64X.exe for Intel64/AMD64 systems. In order to minimise
web-site usage and as most users will not need the 64-bit executables these
currently these are additional downloads. Note that the 32-bit SIV image can still
be used on 64-bit systems, but the native images will provide improved performance and
support for more than 32 CPUs.
Added support for Intel System Controller Hubs
US15W, US15L and UL11L, the Intel 5100
and the Mobile Intel 4 Series PM45, GM45, GS45,
GS40 and GL40 Series of chipsets.
Added support for the AMD Geode LX processor along with the
DM&P Vortex 86 DX, Vortex 86 MX and the
Intel Xeon L5400 processors.
Updated to use the new style Intel Processor and Chipset logos and improved chipset
variant recognition. If SIV does not correctly report your Intel chipset please
e-mail me the SIV -SAVE file, tell me what the chipset should actually be
and I will try and improve things.
Change format of PCIDEVS.txt to be similar
to all the other definition files used by SIV and implemented
PCIDEVS.exe for maintenance.
Add PCIDEVS to the website downloads section.
I have also added a lot of new devices and made a start to generally tidy things up.
Note that I no longer use the PCIDEVS.txt from Craig Hart's site.
Updated the operation of -SAVE to output the names of the save files to STDOUT, use
the same name for the .DMI file as the .TXT file and enhanced the SIV command parsing
to allow quoted file names which can be used in command lines such as
SIV64X -SAVE=[OVERVIEW]="C:\Documents and Settings\save.txt" | more.
The recommended command to generate save files is now
SIV -SAVE | MORE, but using either
SIV64X or
SIV64I for 64-bit systems.
Enhanced the [PCI Bus] page for systems with a lot of PCI Devices, more than would fit on one screen,
by adding navigation buttons similar to the ones used on [Network] panels.
Corrected the operation of [PCI Dev] for none English Windows systems which stored "Device PCI"
rather then "PCI Device" in the Location Information.
Added the [CPU Groups] page and updated SIV for systems with multiple
CPU Groups. This has been validated on both Windows Server 2008 R2 and Windows 7
using V6.01 Build 7100 RC1 and Build 7264, however there may be issues with
earlier builds due to SetThreadGroupAffinity() function changing from taking 2 parameters to 3.
Currently SIV is still limited to 64 CPUs in total and I plan to address this in
SIV V4.01, to this end if you have access to a system with more than 32 CPUs
and would like to help test a SIV V4.01 Beta please
e-mail
me.
Added the [csv] or [csv-titles]
section to the SIV save file. Basically this section contains all the
system and processor information that is summarised on the initial page in an orthogonal
form that is easier to parse. [csv-titles] will include title/header lines that
help in knowing what all the numbers represent.
The general form is
"system name",TAG,#,"p1","p2",... [SUB,"s1","s2",...]...
If an atom is not quoted then it's a TAG, # or SUB directive, otherwise it's a TAG/SUB parameter.
Future versions of SIV may add extra parameters, but existing parameters will NEVER be removed.
If several SUBs are reporting the same set of information such as L1T/L1C/L1D/L2C/L2U/L3U
cache information SUBs then they will all have exactly the same parameters.
Currently the following TAGs are implemented.
SYS Overall System information,
MCH Memory Controller information,
SMB SMBIOS System information,
DIM SMBIOS Memory DIMM information,
TMP System Temperatures,
FAN System Fan Speeds,
VLT System Voltages,
MAP Disk Drive to Volume Mapping with Drive Letters,
DSK Disk Drive SMART information and
CPU Processor information
More may be added in future releases of SIV. To finely control which TAGs are returned the
-TAGS qualifier can be used the syntax is
-TAGS[=TAG[:TAG]...]
specifying -TAGS implies -SAVE=[csv] -NODMI.
|
|
